Management
77
ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
The wireless access point detects the access points and populates the Unknown AP List
for the configured wireless modes.
The following table explains the fields of the Unknown AP List screen:
Setting
Description
MAC Address
The MAC address of the unknown AP.
SSID
The SSID that the unknown AP is using.
Privacy
Indicates whether security is enabled (1 means enabled; 0 means
disabled).
Channel
The channel that the unknown AP is using.
Rate
The transmit data rate in Mbps of the unknown the AP.
Beacon Int.
The interval for each beacon transmission in ms.
# of Beacons
The number of beacons transmitted by the unknown AP that the wireless
access point has detected.
Last Seen
The time stamp that indicates the time when the most recent beacon was
detected.
3.
Click
Save
.
Export the list of unknown APs to a file. A window opens so you can browse to the
location where you want to save the file. The default file name is macList.txt.
4.
(Optionally) After you have reviewed the list, import the saved list into the Known AP List on
the Rogue AP screen (see
Enable and Configure Rogue AP Detection
on page
74).
To view the Known AP Lists and save it to a file:
1.
Select
Monitoring > Rogue AP > Known AP List
.
The Known AP List screen displays:
2.
(Optionally) Click
Refresh
.
