83
computer.
13
Check whether the display works
normally, whether the buttons are
operated effectively, and whether there
are scratches on the surface, etc.
So
ftw
are
pa
rt
14
Clear the hard disk files that are not
necessary for the equipment and store the
files in categories.
15
Open the machine condition monitoring
window to check whether the origin
signal, limit signal and in-place signal of
the X axis and Y axis are normal.
16
Check whether the working regions of the
X axis and Y axis are all within the visual
range of the camera.
17
Check whether the aperture and focus
adjustment screw on the camera lens are
locked.
18
Start and exit the program to see whether
AOI software can be started normally and
whether there is any error.
19
Open the light source brightness inspection
window and use the color
paperboard
to
adjust the light source to the standard value.
20
Take a PCB for lens calibration.
21
Use PCB to make a simple program:
check whether the standard registration is
normal and whether the inspection frame
will offset during the inspection.
22
If fixture is used, check whether the
fixture and clamp plate is normal (whether
the plate is firmly fixed).
23
Check whether the equipment system
backup is normal
Abnormal
situation,
handling and