36
Then divide each pin clearly by comparing with the above figure through [Area Threshold] and
[Segmentation Threshold], or switch between [Registered Image] and [Image to be inspected].
(Note: If there is white silk screen printing between the white bottom plate and the corners and it
is difficult to divide, you can check the [Whiteboard] below for division according to the
situation). After the pins are divided, the software will automatically calculate the number and
width of pins. Then check [Pin Number Check] (note: if you don't need to check the number of
pins, you don't need to check), and then click [Set Pins] to set the pins. As shown in the
following figure: