63
After entering the false alarm interface, a board at the front end will continue to enter for
inspection. When inspecting the next board, check the false alarm of this board to ensure the
speed.
As shown above, the top left is a thumbnail of PCB board, which is marked with the position of
current false alarm. The spilt selected in the yellow box is the skip area, as shown in the
rightmost spilt in the above figure. The upper right part is the FOV enlarged image. The lower
left part is the misreported component, which can be viewed with the [Up] and [Down] keys
of the keyboard. The lower right part is the actual image and registered image of components.
Click the [Enter] key on the keyboard after viewing with the [Up] and [Down] keys to enter
the false alarm interface of the next board.