82
12.3
3. Confirmation form of check process/results
No.
Check content
Inspection
result
Responsible
person
Remarks
H
ard
w
are
pa
rt
1
Check whether the power supply is well
wired and grounded.
2
Check whether the power supply and
signal wiring on the back of the host are in
good contact. Lay emphasis on motion
control card and image collection card.
3
Check whether the camera fixing screws re
firm.
4
Check whether the light source connection is
stable and whether the light source will flash
when shaking the light source line.
5
Check whether the light source casing will
collide with the machine housing; use the
mirror to check if there is any unlit LED
inside the light source.
6
Check whether the track screws are tight
and whether the width adjustment
function is normal.
7
Check whether the buttons on the machine
panel are normal.
8
Check whether the main power switch of
the equipment works normally and
whether it is fixed and locked.
9
Check whether the camera cover is
properly installed.
10
Repeatedly lift and lower the flip cover of
the display to observe whether there are
abnormal image display and other
abnormal situations.
11
Check whether the host is fixed and
locked by screws.
12
Check and clean the filter screen at the
front end of the industrial control