34
Select the type, manually enter the item number and remarks, and choose whether to deposit it in
the public library (note: you can directly transfer it out from the public library when you execute
other programs next time after depositing it in the public library), and then click [OK] to register
it.
After registering, if there are the same components in the same spilt, you can select the made
component frame , right-click [Single-Point Copy], then move the mouse to the same component
and click the left mouse button, and right-click to cancel the copy box. Click [Space Key] to
rotate by 45 degrees at a time. You can also double-click and select the component in the
component library to copy it. As shown in the following figure:
Note: before copying, the component must be registered. If it is not registered, [Single-Point
Copy] cannot be performed.
Diode: [Diode] can be directly selected for making frame based on the noumenon of the diode.
As shown in the following figure: