12
At ambient temperatures below +32
°F
, the service unit must be insulated
to be frost-proof.
Pos : 5.26.5.4 / Betriebs anleitung/Leerz eile 1pt @ 11\mod_1479298310216_0.doc x @ 212267 @ @ 1
Pos : 5.26.5.5 / Betriebs anleitung/Sic herheits hinweise/Abgrenz ungs linie unten @ 36\mod_1552040616240_0.docx @ 317409 @ @ 1
Pos : 5.26.7 /Be triebs anleitung/02 Eins atz bereic h und Tec hnis c he Daten/Druc k luft-
Qualität/Druckluftqualität @ 14\mod_1484905568079_2901.docx @ 216087 @ @ 1
The quality of the compressed air used must comply with the specification of
ISO 8573-1.
The filter shall be supplied with compressed air with the content of oil, moisture
and solids given in the following table according to ISO 8573-1:
Compressed
air- Part 1: Contaminants and purity classes.
Compressed air purity classes according to ISO 8573-1
The pressure dew point should be below 0
°F
for filters installed outdoors. In
the case of filters installed in heated rooms, compressed air moisture
corresponding to a pressure dew point of +6
°F
is allowed.
The optimal way to connect the dust collector pressure tank to the local
network is to use a pressure reducing valve with a combined solids, oil and
water separator. A safety valve must be installed when the supply pressure
exceeds 100 psi.
Pos: 7.1 /Be triebsanleitung/Überschriften/1/03 Grundlegende Sicherheitshinweise @ 14\mod_1485435551957_2901.docx @ 216301 @ @ 1
3
Fundamental safety instructions
Pos : 7.2 /Be triebs anleitung/Leerzeile Halb @ 10\mod_1478598405587_0.docx @ 209637 @ @ 1
Pos: 7.3.1 / Betriebsanleitung/Überschriften/1.1/03 Grundlegende Sicherheitshinweise/Produktsicherheit @ 14\mod_1485437907551_2901.docx @ 216329 @ @ 1
3.1
Product safety
Pos : 7.3.2 / Betriebs anleitung/Leerz eile Halb @ 10\mod_1478598405587_0.docx @ 209637 @ @ 1
Pos : 7.3.3 / Betriebs anleitung/03 Grundlegende Sic herheits hinweis e/Produk ts ic herheit/Produk ts ic herheit @ 14\mod_1485784676060_2901.doc x @ 216859 @ @ 1
The machine / plant is manufactured according to the safety specifications of
the EU, which are current at the time of delivery. Depending on the location, the
relevant national legal regulations must be observed!
Nevertheless, danger to life or limb of the operator or third parties and / or
damage to the machine/plant and other property may occur as a result of using
the machine / plant.
➔
Only use the machine / plant in a technically perfect condition and in
accordance with regulations, in a safety- and risk-conscious manner under
observation of the instructions.
➔
Any faults that may restrict safety must be rectified immediately.
Pos : 7.3.4 / Betriebs anleitung/Leerz eile Halb @ 10\mod_1478598405587_0.docx @ 209637 @ @ 1
Pos: 7.3.5 / Betriebsanleitung/03 Grundlegende Sicherheitshinweise/Produktsicherheit/Sämtliche Umbauten und Veränderungen an d er Maschine/Anlage @ 33\mod_1529578551356_2901.docx @ 291459 @ @ 1
Any alterations or modifications to the machine / plant are forbidden unless
explicitly approved by the manufacturer in writing. This also applies for the
installation and adjustment of safety devices as well as welding on load-bearing
parts. Non-compliance results in warranty invalidation.
Pos : 7.4 /Be triebs anleitung/----- Seitenumbruch ----- @ 10\mod_1478587717206_0.docx @ 209487 @ @ 1
Pos: 7.5.1 / Betriebsanleitung/Überschriften/1.1/03 Grundlegende Sicherheitshinweise/Pflichten des Betreibers @ 14\mod_1485438060741_2901.docx @ 216357 @ @ 1
Compressed air purity
Class
for particles
2
for moisture and liquid water with temp. T*
>
+37.4
°F
4
for moisture and liquid water with temp. -4
°F
< T* < +37.4
°F
3
for moisture and liquid water with temp. -40
°F
< T* < -4
°F
2
for oil
1
*
T -
temperature range
