NEC Univerge SV9100, Особенности и характеристики

Страница: 1311 / 1402

1311
Program
Number
Program Name/Description Input Data Default
16-01-05 Department Group Basic Data Setup
–
Extension Group All Ring Mode Operation
Determine whether calls ringing a Department
Group should ring all extensions in the group
simultaneously automatically or manually when
using the service code defined in Program
11-12-09. When set to 1, only ICM and DID
calls ring all stations in the Department Group.
0 = Manual
1 = Automatic
0
16-01-06 Department Group Basic Data Setup
– STG
Withdraw Mode
Set the STG Withdraw Mode for each
department group.
0 = Disable (Camp On)
1 = Enable (Overflow Mode)
0
16-01-07 Department Group Basic Data Setup
– Call
Recall Restriction for STG
Determine whether or not an unanswered call
transferred to a Department Group should
recall the extension from which it was
transferred.
0 = Disable (Recall)
1 = Enable (No Recall)
0
16-01-09 Department Group Basic Data Setup
–
Department Hunting No Answer Time
Set the time a call rings a Department Group
extension before hunting occurs.
0 ~ 64800 seconds 15
16-01-10 Department Group Basic Data Setup
–
Enhanced Hunt Type
Set the type of hunting for each Extension
(Department) Group.
0 = No queuing
1 = Hunting When Busy
2 = Hunting When Not
Answered
3 = Hunting When Busy or No
Answer
0
16-02-01 Department Group Assignment for
Extensions
Set up the Department Group called by the pilot
number and the extension priority when the
group is called.
Call Pickup Groups are set up in Program
23-02.
Department Groups 1 ~ 64
Priority 1 ~ 9999
Default = All
extensions in
Department
Group 1 with
priority in port
order:
Port 1 priority = 1
Port 256 priority
= 256
20-02-09 System Options for Multiline Telephones
–
Disconnect Supervision
Enable/Disable disconnect supervision for the
system trunks.
0 = Disable
1 = Enable
1
20-03-01 System Options for Single Line Telephones
– SLT Call Waiting Answer Mode
For a busy single line (500/2500) telephone, set
the mode used to answer a camped-on trunk
call. The default setting should be used.
0 = Hookflash (Hooking)
1 = Hoo Service Code
794
Service Code 654 is for Live
Recording at SLT (Program
11-12-53).
0