KIT-Z100
Quick Start
P/N: 2 9 0 0 - 3 0 1 4 2 0 QS
Rev: 1
Scan for full manual
KIT-Z100 Quick Start Guide
This guide helps you install and use your
KIT-Z100
for the first time.
Go to
www.kramerav.com/downloads/KIT-Z100
to download the latest user manual and check if firmware
upgrades are available.
Step 1:
Check what’s in the package
ECU-Z100
1 19V DC power adapter and cord
1 Quick start guide
KT-107Z/KT-107ZRB
(with restricted BW, up to 5.35GHz)
1 5.2V power adapter and cord
Tabletop mount
On-wall mount unit
1 C-USB/Micro B cable
Installation screws
Panel Mount plate
1 right-angle OTG USB cable
Step 2: Get to know your KIT-Z100
ECU-Z100
#
Feature
Function
1
Power Button
For turning the unit on and off.
2
USB 2.0 Connector
For upgrading firmware or connecting a USB device.
3
Wi-Fi Antenna Port (2)
Connect the Wi-Fi antennas for collaborating via the built-in Wi-Fi.
4
DC IN 19V Connector
Connect to the 19V DC power adapter.
5
HDMI OUT Connector
Connect to an HDMI display.
6
DP OUT Connector
Connect to a DisplayPort display.
7
USB 3.0 Connectors
Connect to up to 2 USB devices.
8
USB 2.0 Connectors
Connect to up to 2 USB devices.
9
LAN RJ-45 Connector
Connect a Local Area Network (LAN) cable.
10
REMOTE 2-pin Terminal Block Connector
Connect to a toggle switch to remotely turn the device on and off.
11
AUDIO
MIC IN 3.5mm Mini Jack
Connect to a microphone.
12
LINE OUT 3.5mm Mini Jack
Connect to an unbalanced stereo audio acceptor.
