KT-107Z/KT-107ZRB
Both Table-top mount and wall mount
include the following connectors:
•
A power connector, when not
using the PoE Ethernet port.
•
PoE RJ-45 Ethernet Port to
connect to an Ethernet cable.
•
A USB connector:
▪
For the table-top mount, a
Micro-USB port, for
connecting an external USB
device (for example, a
headset or memory disk).
▪
For the wall mount, a Type A
USB port is available using
the right-angle OTG USB
cable (included).
#
Feature
Function
13
Hidden Reset Button
Located on top-side. Insert a pin and hold for a few seconds to reset
KT-107Z/KT-107ZRB
.
14
Light Sensor
Automatically adjusts the screen brightness according to the room lighting conditions.
15
Activity RGB LED
Lights green when powered, flashes green when charging the battery, lights red when camera
on.
16
Camera
For remote room viewing or video conferencing.
17
Microphone
For audio communication, recording or conferencing.
18
Speakers
To output the sound.
19
Control Button
Press and hold (for 2 seconds) to power down the unit, reboot it or return to the Home-page,
via pop-up menu. This button is password protected (default: Kramer).
20
Tabletop Mount Connector For connecting to the tabletop mount.
21
Cover
Covers the wall mount connections and power button.
22
Power Button
Press to power on the
KT-107Z
/KT-107ZRB
. When powered, press briefly to power down the
device, reboot it or return to the Home-page, via pop-up menu. Press and hold to power down
the device immediately. This button is also used for firmware upgrade.
23
Volume-up Button
Use to increase
KT-107Z/KT-107ZRB
speaker volume. Use also for firmware upgrade.
24
Micro USB Port
For connecting to an adjacent on-wall USB device and for firmware upgrade.
25
Flat Cable Connector
For connecting to the on-wall mount unit.
26
Connecting Holes
For connecting to the tabletop mount or the panel mount plate.
To prevent potential damage to the
KT-107Z/KT-107ZRB
, use only Kramer supplied screws
and mounts.
Step 3: Mount ECU-Z100
Install
ECU-Z100
using one of the following methods:
•
Attach the rubber feet and place the unit on a flat surface.
•
Fasten a bracket (included) on each side of the unit and attach it to a flat surface
(see
www.kramerav.com/downloads/KIT-Z100
•
Mount the unit in a rack using the recommended rack adapter
(see
www.kramerav.com/product/KIT-Z100
•
Ensure that the environment (e.g., maximum ambient temperature &
air flow) is compatible for the device.
•
Avoid uneven mechanical loading.
•
Appropriate consideration of equipment nameplate ratings should be
used for avoiding overloading of the circuits.
•
Reliable earthing of rack-mounted equipment should be maintained.