NEC Univerge SV9100, Особенности и характеристики

Страница: 88 / 1402

88
Barge-In
Description
Barge-In permits an extension user to break into another extension
user’s established call, including
Conference calls. This sets up a Conference-type conversation between the intruding extension and the
parties on the initial call. With Barge-In, an extension user can get a message through to a busy
co-worker right away.
There are two Barge-In modes: Monitor Mode (Silent Monitor) and Speech Mode. With Monitor Mode,
the caller Barging In can listen to another
user’s conversation but cannot participate. With Speech Mode,
the caller Barging In can listen and join another
user’s conversation.
The use of monitoring, recording, or listening devices to eavesdrop, monitor, retrieve, or record telephone conversation
or other sound activities, whether or not contemporaneous with transmission, may be illegal in certain circumstances
under federal or state laws. Legal advice should be sought prior to implementing any practice that monitors or records
any telephone conversation. Some federal and state laws require some form of notification to all parties to a telephone
conversation, such as using a beep tone or other notification methods or requiring the consent of all parties to the
telephone conversation, prior to monitoring or recording the telephone conversation. Some of these laws incorporate
strict penalties.
Conditions
An extension user can barge-in on a conference.
An extension user cannot barge-in on an Intercom call if one of the intercom callers is using
Handsfree Answerback. Both Intercom parties must lift the handset or press Speaker.
With Program 20-13-10 set to 0, a barged into call can be placed on hold by the originator
of the outside call. Both the outside caller and the extension that barged into the call are
placed on hold.
With Program 20-13-10 set to 1, a call which is barged into can be placed on Park by the
originator of the outside call, but only the outside caller is placed in Park. The extension
which barged into the call is dropped.
When Program 20-13-10 is set to 1 (Monitor), only one party can barge into the call.
Privacy blocks Barge-In attempts.
Function keys simplify the Barge-In operation.
When Silent Monitor Mode is used, MIC or F 1 can be used to activate speech path
to the internal and external parties.
The Barge-In key allows for additional data to be assigned to the key. The additional data
can be set to:
Nothing (same as before).
Extension Number (when pressed it will Barge-In to that Extension).
The
*
(when pressed) barges into the Extension where Call Forward Both Ring is set. If no
Forward Both Ring is set, it will act as though no additional data is set [Basic Barge-In
Functionality]).
When using Barge-In, the maximum number of conference ports supported is 32 (two
original participants and a maximum of 30 Barge-In participants).