NEC Univerge SV9100, Особенности и характеристики

Страница: 74 / 1402

74
Program
Number
Program Name/Description Input Data Default
44-01-01 System Options for ARS/F-Route
– ARS/F-
Route Time Schedule
Select whether the ARS/F-Route feature should
use the time schedule (0=not used, 1=used). If
this option is set to 0, the F-Route table
selected is determined only by the digits dialed
without any relation to the day or time of the
call. If this option is set to 1, the system first
refers to Program 44-10. If there is a match, the
pattern defined in that program is used. If not,
the F-Route pattern in Program 44-09 and time
setting in Program 44-08 are used.
0 = Not Used
1 = Used
0
44-02-01 Dial Analysis Table for ARS/F-Route Access
– Dial
Set the Dial digits for the Pre-Transaction Table
for selecting ARS/F-Route (eight digits
maximum: 1 ~ 9, 0 *
#
, @). To enter a wild
card/don’t care digit, press Line Key 1 to enter
an @ symbol.
Maximum of eight digits
(Use line key 1 for a
‘Don’t Care’
digit, @)
No Setting
44-02-02 Dial Analysis Table for ARS/F-Route Access
– Service Type
Set the Service Type (0 ~ 3) for the
Pre-Transaction Table for selecting ARS/
F-Route.
0 = No Setting (None)
1 = Extension Call (Own)
2 = ARS/F-Route Table
(F-Route)
3 = Dial Extension Analyze
Table (Option)
0
44-02-03 Dial Analysis Table for ARS/F-Route Access
– Additional Data
If a Service Type is set to F-Route in Program
44-02-02, set which F-Route table to use.
1 = Delete Digit = 0 ~ 255
(255: Delete All Digits)
2 = 0 ~ 500
(0 = No Setting)
3 = Dial Extension Analyze
Table Number = 0 ~ 4
(0 = No Setting)
0
44-02-04 Dial Analysis Table for ARS/F-Route Access
– Dial Tone Simulation
Determine if the Dial Tone Simulation is On (1)
or Off (0) for the Pre-Transaction Table for
selecting ARS/F-Route. If enabled, this option
sends dial tone to the calling party once the
routing is determined. This may be required if
the central office at the destination does not
send dial tone.
0 = Off
1 = On
0
44-03-01 Dial Analysis Extension Table
– Dial
Set the Dial digits (24 digits maximum: 1 ~ 9, 0
*
#
, @) to be used for the Dial Extension
Analysis Table. When Program 44-02-02 is set
to type 3, this program sets the dial extension
analysis table. These tables are used when the
analyzed digits must be more than eight digits.
To enter a wild
card/don’t care digit, press Line
Key 1 to enter an @ symbol.
Maximum of 24 digits
Digits = 1 ~ 9, 0, *, #, @
(Press Line Key 1 for wild
character @)
No Setting