NEC Univerge SV9100, Особенности и характеристики

Страница: 691 / 1402

691
NAPT Traversal
Description
NAPT ( N etwork A ddress P ort T ranslation), is a method by which a private address or addresses and
their TCP/UDP ports are translated into a single public address and its TCP/UDP ports. The NAPT
feature gives the SV9100 the ability to
“traverse” its own subnet. With NAPT, the network administrator
can place the GCD-CP10 and the GPZ-IPLE (VoIPDB) in the customers LAN while still making it
accessible to users outside the local LAN. The NAPT Feature also allows the IP terminals to be placed
in a local LAN in a remote network and be able to communicate back to the SV9100.
The router that the SV9100 resides behind still requires Port Forwarding statements. However the
router that the IP terminal/terminals reside behind may not require any port forwarding. This feature is
only available when using a GPZ-IPLE. Due to the fact that there are many manufacturers producing
routers there may still be times when port forwarding is required.
In all software versions, SIP ALG’s (Application Level Gateway) or other SIP Applications MUST be
disabled in all routers. If a SIP ALG or a similar SIP application is enabled, IP phone service WILL be
interrupted.
The NAPT feature is only effective when Program15-05-45 is set
“1” (On). Refer to Example – NAT
Traversal or an examples of the NAT Traversal network. Example
– Required System Settings and
Example
– Required IP Terminal Settings on examples of required system and IP terminal settings. Refer
to Example
– SV9100 System Router A Port Forwarding Settingsfor Port Forwarding setting examples.
Actual input data should be set according to the required system.
Example
– NAT Traversal