NEC POWERMATE ES 5200 - SERVICE, Руководство по обслуживанию

Страница: 74 / 306

System Configuration 2-37
Note:
Some older software may not work in a Windows
95 or Windows 98 system configured for FAT 32. In addition,
select FAT16 if a dual-boot system (with Windows 95 or
Windows 98 and Windows NT 4.0) is desired.
4. A FAT 16 or FAT 32 Partition warning screen appears indicating that the
system is about to partition and format your hard drive using the FDISK
program. This warning screen contains three options: Back, Exit, and
Continue.
5.
Click Continue . The following steps should take place.
„
system performs FDISK
„
system reboots
„
partitions are formatted
„
OS and drivers load from the CD
The “Operating System Restore Completed” screen appears when all files
have been restored.
6.
Remove the CD from the CD tray.
7.
Click OK to reboot.
This completes the Auto Rebuild and Restore procedure.
See “NEC Application and Driver CD” for instructions on installing any of the
applications or online documents, or to install device drivers that did not come
with your system.
Restore any application or driver that was not provided by NEC by using the
vendor diskette(s) or CD-ROM(s) included in its original packaging.
Custom Rebuild and Restore
Follow these steps to format your hard drive with choices on repartitioning the
drive:
!
CAUTION
This OS Restore program deletes all the data on your hard
drive. If possible, back up your data before performing an
OS restore.
1. Launch the NEC OS Restore CD and follow the prompts to get to the
Restore Mode screen (see “Launching the OS Restore CD”).
2.
Click Custom to repartition and/or and reformat your hard drive before
reinstalling the operating system.