NEC POWERMATE ES 5200 - SERVICE, Руководство по обслуживанию

Страница: 68 / 306

System Configuration 2-31
SNMP-managed devices on a network send messages (traps) when a preset level
of device activity occurs. Notification of events with SNMP traps is sent to a
network manager upon reaching either a user-specified over-threshold or under-
threshold condition for any supported management information base (MIB)
variable.
The following sections describe how to install and configure the NEC SNMP
Agent on systems running the Microsoft Windows 95, Windows 98, or
Microsoft Windows NT operating system.
Installing the NEC SNMP Agent
Install the NEC SNMP Agent on a system running the Windows 95, Windows
98, or Windows NT operating system as follows.
Note:
Install the NEC SNMP Agent software from the
NEC Application and Driver CD or download the software
from the NEC CSD website (
www.nec-computers.com
).
1. For systems with the NEC SNMP Agent on the NEC Application and Driver
CD, see “Installing ToolTelligent Utilities” for installation instructions.
2.
For systems without NEC SNMP Agent on the NEC Application and Driver
CD, download the software from the NEC CSD website (
www.nec-
computers.com
). Save the download file in your
C:\Temp
directory or
other appropriate directory. Double click
setup.exe
and follow the prompts.
Configuring the NEC SNMP Agent for Windows 95 or Windows 98
The SNMP Agent is configured with the Windows 95 Policy Editor. The Policy
Editor configures the traps, communities, and other policies.
Use the Policy Editor to configure the traps, communities, and other policies as
follows.
1.
In the Windows taskbar, click Start , and point to Programs , Accessories ,
and System Tools . Click System Policy Editor .
2. At the “System Policy Editor,” click
File
and point to
Open Registry
.
Double click
Local Computer
.
3. Expand Network and expand SNMP to display the list of policies. The
policies are:
„
Communities — Specifies one or more groups of hosts that this
computer belongs to and that can be managed with SNMP.
„
Permitted Managers — Limits the set of SNMP management
applications that can access this computer to those with the IP or IPX
addresses that the user provides.