NEC POWERMATE ES 5200 - SERVICE, Руководство по обслуживанию

Страница: 121 / 306

3-38 Disassembly and Reassembly
!
CAUTION
Before you install a module, reduce static discharge by
touching the system’s metal chassis.
3. Align the new module with an empty memory socket. Make sure the notches
on the module align with the keys in the socket (see the following figure).
4.
Press the module firmly into the socket.
5.
Make sure the locking clips at either end of the module click closed.
6. Replace the system board.
„
For a small desktop system, see “Installing the System Board — Small
Desktop.”
„
For a desktop system, see “Installing the System Board — Desktop.”
„
For a minitower system, see “Installing the System Board —
Minitower.”
Positioning a DIMM
A – Plastic Clips B – Notches
7.
Replace the cover(s):
„
For a small desktop or desktop system, see “Replacing the Small
Desktop or Desktop Cover.”
„
For a minitower system, see “Replacing the Minitower Side Covers.”
Note:
If you find a discrepancy in the amount of
memory displayed at the Power-On Self-Test or in Windows
with the amount of memory that you installed, check that you
installed the memory modules correctly.