NEC POWERMATE ES 5200 - SERVICE, Руководство по обслуживанию

Страница: 142 / 306

Disassembly and Reassembly 3-59
5.
Connect any other cables that may have been disconnected for access to the
system board.
Positioning the Pentium II Processor Cartridge
A – Processor Cartridge C – Retention Mechanism
B – Heat Sink D – Slot 1 Connector
6. Replace the system unit cover.
„
For a small desktop or desktop system, see “Replacing the Small
Desktop or Desktop Cover.”
„
For a minitower system, see “Replacing the Minitower Side Covers.”
7.
Press the power button to start the system. Press F2 to enter the CMOS
Setup Utility.
„
If the system does not boot (as might be the case if you are replacing
one processor with a slower one), press the power button a second time.
„
If the system still does not boot, clear CMOS (see “Clearing the CMOS”
and “Changing a System Board Jumper Setting”).
8.
Set the processor speed using the CMOS Setup Utility (see “Special
Features Setup” in Section 2).