NEC POWERMATE ES 5200 - SERVICE, Руководство по обслуживанию

Страница: 45 / 306

2-8 System Configuration
„
check the installation of optional memory by comparing the amount of
memory installed with the amount of memory displayed by Setup
„
change certain operating parameters, such as boot device sequence and
keyboard parameters
„
configure system connections for peripherals such as diskette drive, hard
drives, and devices connected to the printer port and serial ports
„
customize the system with security features such as passwords, diskette
drive restriction, virus check reminder, and system backup reminder
„
set system parameters after the CMOS battery is replaced.
Note:
If a Power On mode is set in the CMOS Setup
Utility, it overrides the JP1 jumper setting.
How to Start CMOS Setup
To start the CMOS Setup Utility, follow these steps:
1. Turn on or reboot the system.
2. Press
F2
as soon as you see this message:
Press [ESC] to show POST, [F2] to enter SETUP.
You have about five seconds to press F2 before the system boot continues.
3.
Setup’s Main menu appears and looks similar to the following screen.
CMOS Setup Utility Main Menu
A – Menu Title D – Navigation Keys
B – Selected Menu Item E – Description of Selected Menu Item
C – Menu Items