NEC PG-FPL3, Руководство пользователя

Страница: 49 / 80

CHAPTER 4 OPERATION USING GUI SOFTWARE
User’s Manual U17454EJ1V0UM
49
[When Area is selected]
Specify the Area number range subject to rewrite processing by using Start/End.
The Start/End list boxes display the Area number where the flash memory of the target device is
configured.
[Show Address check box]
Specifies whether numbers or addresses are displayed in the Start/End list boxes.
If this check box is checked, addresses are displayed.
If it is not checked, numbers are displayed.
<5> Target Reset Message
By checking the Target Reset Message check box, the window promoting the reset operation
manually is displayed even when the reset signal cannot be connected to the target cable.
Figure 4-12. Device Setup Window
−
Target Reset Message
Remark The Target Reset Message check box is common to Standard and Advance tabs.