NEC PG-FPL3, Руководство пользователя

Страница: 45 / 80

CHAPTER 4 OPERATION USING GUI SOFTWARE
User’s Manual U17454EJ1V0UM
45
(9) [Get Security settings] command
The [Get Security settings] command reads the Security flag information of the target device, and reflects the
result in the Advanced Setup menu.
When this menu can be specified, be sure to check the security by executing the [Get Security settings]
command immediately before the security command is executed, and specify any additional security.
Figure 4-5. Device Setup Window
−
Advance Tab
(10) [Setup…] command
The [Setup…] command is used to perform flash memory writing settings in accordance with the
user environment, and command option settings. Each time the GUI software is started, the
parameter file (.PRM) and customized setup file (.SET) that were used last are read, and their setting contents
are displayed. Settings can be changed in accordance with the user environment, except for the parameters
that are dimmed. In addition, new settings can be saved to the customized setup file (the data of the
parameter file cannot be changed).