NEC PG-FPL3, Руководство пользователя

Страница: 43 / 80

CHAPTER 4 OPERATION USING GUI SOFTWARE
User’s Manual U17454EJ1V0UM
43
4.4.2 [Device] menu
Clicking the [Device] menu displays the following pull-down menu.
This pull-down menu mainly consists of commands for programming the target device, such as erase, program,
and verify.
Figure 4-4. [Device] Menu
(1) [Blank Check] command
The [Blank Check] command initiates a blank check of the target device connected to the FPL3. If
the flash memory of the target device is erased, the blank check terminates successfully. If the flash
memory is not completely erased, “not blank” is displayed. Erase the flash memory of the target device before
starting programming.
(2) [Erase] command
The [Erase] command initiates the erase procedure for the target device connected to the FPL3.
While erasing the contents in the flash memory is in progress, the progress is displayed in the action
log window, indicating the operation of the programmer.
The [Blank Check] command that is executed before the [Erase] command is executed in accordance with the
setting of ‘Command options’ on the Advance tab of the [Device] > [Setup…] menu.
After completing the [Erase] command, the GUI software displays the target device command execution result.
Caution During an erase operation, the Status LED is not turned on. Do not disconnect the target
cable and USB cable until the GUI software displays “Erase finished”. Otherwise, the target
device may be damaged.