manualshive.com logo in svg

NEC Express5800/A1080a, Руководство пользователя, Страница: 68 / 696

Поделиться
Скачать
NEC Express5800/A1080a Скачать руководство пользователя страница 68

 

68

 

Setup of OS 

 

After completing the hardware setup, proceed to set up the OS.   
 
Contact the distributor from which you purchased or the maintenance service company for 
installation procedure of Windows other than Windows Server 2008/Windows Sever 2008 R2.

 

 
 

Setting up Windows Server 2008 

 
After completing the hardware setup, set up Windows Server 2008 and the system. 
Refer to 

“Introduction”

 and 

“Hardware”

 for the hardware setup procedure. 

Refer also to the following online manuals included in the attached “NEC EXPRESSBUILDER” 
DVD for Windows Server 2008 and the system setup.

   

- 

Microsoft® Windows Server® 2008 Enterprise x64 with Service Pack 2/ 

Microsoft® Windows Server® 2008 Datacenter x64 with Service Pack 2 Installation Guide 

 

Setting up Windows Server 2008 R2 

 

After completing the hardware setup, set up Windows Server 2008 R2 and the system. 
Refer to 

“Introduction”

 and 

“Hardware”

 for the hardware setup procedure.   

Refer also to the following online manuals included in the attached “NEC EXPRESSBUILDER” 
DVD for Windows Server 2008 R2 and the system setup.

   

- 

Microsoft® Windows Server® 2008 R2 Enterprise/ 

Microsoft® Windows Server® 2008 R2 Datacenter Installation Guide 

 

Setting up Other Type of OS 

 

After completing the hardware setup, set up OS and the system. 
Refer to 

“Introduction”

 and 

“Hardware”

 for the hardware setup procedure. 

Refer also to the installation guide separately provided for each OS for the setup procedure of 
OS and the system.

 

 
 
 
 
 
 
 
 
 
 

 

IMPORTANT: 

●

 Before starting setup forOS with EXPRESSBUILDER, ensure that 

all cores in the server is checked as “Valid(Enable)” on the Core 
Status screen of the System Web Console. 

●

If any core in the server is checked as “Invalid(Disable)”, OS 

setup may not be started. 

(This restriction will be removed in the future.) 

Содержание Express5800/A1080a

























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов