manualshive.com logo in svg

NEC Express5800/A1080a, Руководство пользователя, Страница: 193 / 696

Поделиться
Скачать
NEC Express5800/A1080a Скачать руководство пользователя страница 193

Hardware 

 

 

 

193

 

 

Installation/Uninstallation Procedure 

 

Install/Uninstall parts by following the procedure below. 

 

Hard Disk 

 

There are 12 slots provided in a 2.5-inch disk bay located on the front of the server. 
A 2.5-inch hard disk drive can be installed in these 12 slots. 

 

A hard disk drive installed to a dedicated drive carrier can be purchased. Install it to the server 
with the drive carrier being mounted to. 

 

Use a hard disk drive of the same NEC model number for adding or replacing.   

 
 
 
 
 
 

A dummy tray is installed in an empty slot of the 2.5-inch disk bay. This is to improve the cooling 
effect of inside the server. Install a dummy tray in a slot in which a hard disk drive is not installed. 

 
 
 
 
 

IMPORTANT: 
Use a dedicated dummy tray to the server. 

IMPORTANT: 

●

 Only use a hard disk drive that is authorized and specified by 

NEC. If a hard disk drives, etc. from third parties are installed, 
not only the hard disk drive, but also the server itself may fail.

 

Содержание Express5800/A1080a

























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов