NEC Express5800/A1080a Скачать руководство пользователя страница 588 | Manualshive

Страница: 588 / 696

NEC Express5800/A1080a Скачать руководство пользователя страница 588

Operation and Maintenance

588

Fatal of the following contents may be logged to the system event log when restoring by
Windows Server Backup and restarting the system.

Event ID:

41

Source: Microsoft-Windows-Kernel-Power
Type: Fatal
Description:  The system has restarted before shutting down the system normally.
          This error may occur because of stopping the system response, the system crush or
          the unexpected power off.

→

Refer to the following Microsoft website for more details.

http://support.microsoft.com/kb/979237/ja

(Japanese only)

System time lags.

→

System time may lag if no server to adjust time such as NTP (Network Time Protocol) is used. Use

an NTP server or disable Windows Time Service in this case.

STOP error occurs.

→

Blue screen appears and OS dump begins. The collected OS dump is expected to be

analyzed by a person in charge of the software.

The server is rebooted after collecting the dump. Collect the event log of Windows and ask for

analysis in addition to the dump analysis.

«
...
586
587
588
589
590
...
»

Содержание Express5800/A1080a

























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов