NEC Express5800/A1080a, Руководство пользователя, Страница: 411 / 696

Hardware
411
Active
：
Change usable the processor state(P-State)
* Default value is ‘Passive’.
If you click “Submit” button after you have changed the settings, the following message
will be displayed if clicking.
” All servers need shutdown to apply the changed setting(s). Do you want to apply the
changed setting(s)?"
If you click “OK” button, either of two following messages will be displayed.
” The requested changes has been saved, and will take effect at next all servers boot.”
The changed settings will be saved, but changed settings will be not applied
dynamically.
(4) Miscellaneous
Display/set other setting information.
Maintenance Mode : Maintenance mode
This mode is used for the customer engineer. The Customer
engineer sets this mode enable before starting maintenance,
and sets needed maintenance times (settable
values ;6-65535) by minute unit. This mode is used for the
customer engineer. The Customer engineer sets this mode
enable before starting maintenance, and sets needed
maintenance times (settable In maintenance mode, the icon
will appear on right of upper side. Customer does not need
set this mode.
-Default maintenance time (at Disabled mode):0 minute
-Default maintenance time (at Enabled mode):6 minutes
Core Status RAS Mode : Core RAS function control
If this mode is valid and the system has one or more
alternative cores in the system, the BMC disabled the
processor core at processor core failure. And the BMC
reconfigure the server resource.
IMPORTANT:
The following message will be displayed before five minutes to go.