manualshive.com logo in svg

NEC Express5800/A1080a, Руководство пользователя, Страница: 199 / 696

Поделиться
Скачать
NEC Express5800/A1080a Скачать руководство пользователя страница 199

Hardware 

 

 

 

199

 

Power Supply Unit 

 

Replacing Failed Power Supply Unit 

 

Replace the power supply unit only when it failed. 

 
 
 
 
 
 
 
 
 

1.  Check the failed power supply unit with the Status LED of the power supply unit located on 

the rear side. 
The Status LED lighting in amber indicates that the power supply unit is failing. 

 
2. Refer 

to 

“Preparation for Mounting/Unmounting”

 for preparation. 

 

Online replacement can be performed when the power supply unit is configured by 
redundant configuration. 
 

Turning the power OFF is required if it is not the redundant configuration. 

 
3.  Open the repeat ties for preventing it from falling off and remove the power code. 

 
4.  (1) While unlocking the power supply unit, (2) hold the handle and pull out slowly backward 

to unmount the unit. 

 

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 

IMPORTANT: 
Do not unmount the power supply unit that is operating properly. 

NOTE: 
When the server is running under the power redundant configuration 
and the minimum number of servers are running properly (Status LED of 
the power supply unit is lighting), the power supply unit can be replaced 
even when the system is operating (power-on status). 

IMPORTANT: 
Pull out the power supply unit horizontally. The power supply unit or 
internal connector may be damaged if it is inclined or pressure is added 
from side to side and up and down while pulling out. 

(1) 

(2) 

Handle 

Содержание Express5800/A1080a

























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов