NEC Express5800/A1080a Скачать руководство пользователя страница 525

Страница: 525 / 696

Hardware

525

Execute the command such as below when updating the BIOS.

-> load -source tftp://192.168.1.1/0001A052_R828.rom -oemnecfiletype bios

Execute the command such as below when restoring the SG information.

-> load -source tftp://192.168.1.1/bmcsg1.zip -oemnecfiletype sg partition1

・

reset

The format of reset command is shown below.

reset [<options>] [<target>]

This command reboots(power cycle) of the partition(server). Add “-f” option if it is needed to be

powered off and on compulsory.
Below is the example.

-> reset partition1

IMPORTANT:
•After updating the BIOS, the new BIOS is started up at the next

DC power ON. The management firmware is not necessary.

IMPORTANT:
•Restoring SG information is executed for each partition
(server).
•The management firmware is automatically reset and the new

SG information is available after restoring the SG information.

HINT:
•SG,System Genaration, means the configuration settings for

the system.

IMPORTANT:
•There is a risk to break the OS disk if the power is off and on

compulsory during OS is operationg.

HINT:
•The power cycle means the behavior that the power is ON

automatically after the power OFF. Reboot means the behavior
that the power is ON after the power OFF.

Содержание Express5800/A1080a

























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Express5800/A1080a

Отзывы:

NEC Express5800/A1080a, Руководство пользователя, Страница: 525 / 696

Результаты поиска

Содержание Express5800/A1080a

Отзывы: