NEC Express5800/A1080a Скачать руководство пользователя страница 194 | Manualshive

Страница: 194 / 696

NEC Express5800/A1080a Скачать руководство пользователя страница 194

Hardware

194

Installation

Install a hard disk drive by following the procedure below. Install in other slots with the same
procedure.

1. Refer to “Preparation for Mounting/Unmounting” for preparation.

2. Check slots to install a hard disk drive.

3. Remove a dummy tray to add a hard disk drive.

For replacement, remove the hard disk drive to be replaced.

4. Unlock the drive carrier of a newly installed hard disk and pull out the handle.

NOTE:
There is no need to unmount the server from the rack to
install/uninstall a hard disk drive.
In the RAID system such as RAID1, 5, 6, 10, and 50, replacement
can be performed even when the power of the server is ON.

IMPORTANT:
Use the same NEC model number for had disk drives configuring
the same disk array when the RAID system in configured.

IMPORTANT:
Keep the dummy tray removed for addition in a safe place.

NOTE:Note that location numbers are assigned to hard disk drives
starting from number 0. Refer to “RAID System
Configuration/Before using WebBIOS/

Slot numbers and their

indications on utility software”

(1)

(2)

«
...
192
193
194
195
196
...
»

Содержание Express5800/A1080a

























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов