NEC Express5800/A1080a, Руководство пользователя, Страница: 404 / 696

Hardware
404
(2) Clicking
“Submit” enables to set the time and date with the information of (1).
(3) Selecting
“Set NTP Server Setting” enables to set time and date using NTP server.
(3)-1 Set IP address of NTP server in
“NTP Server IP.”
(3)-2 Set UTC offset value(from -24 to +24
、 and operator designated value) in “Universal
Time(UTC)Offset”. This value is used to set the GMT time which is obtained from the
designated NTP server as the local time of system. As for the custom setting, please refer
to (1)-3.
(4) Clicking
“Submit” enables to set the information of (3).
IMPORTANT:
•
Because changing the current time significantly while the
system power is on may affect to the Management Firmware,
power off the system before doing the significant change. If
this rule is not kept, malfunction such as disconnection of
SOL session, power-up fail or maintenance mode abort may
occur.
• (3)-1 If IP address is included in the NTP Server IP, the NTP
setting is valid. If it is a blank, the NTP setting is invalid.