manualshive.com logo in svg

NEC Express5800/A1080a, Руководство пользователя, Страница: 180 / 696

Поделиться
Скачать
NEC Express5800/A1080a Скачать руководство пользователя страница 180

Hardware 

 

 

 

180

 

(3) Press the Forcible Shutdown button on the management module for at least five 

seconds. 

 
 
 
 
 
 
 

 

(4) Use SMASH-CLP   

 

Refer to the chapter which describe SMASH-CLP in details.

 

 
 
 

Checking Server Position (ID Switch) 

 

“ID LED” is provided on the front and rear side of a server to recognize which server is to be 
maintained when multiple servers are mounted to a rack. 
 
ID LED lights by pressing the ID button of EXPRESSSCOPE

®

 Monitor on the front of the server 

or management module on the rear of the server. Pressing again turns the LED off. 
 
It is also possible to light/turn off the LED from Hardware Locater in the Monitoring menu of 
System Web Console, Server Web Console, or Resource Web Console. 
 
It may be necessary to remove the power or interface cable of the server operating properly as 
the maintenance work from the rear of the rack is usually performed in a dark and narrow space. 
It is recommended to perform the work after checking the position of the server to be maintained 
by using the ID switch. 

 

 

IMPORTANT: 

●

 For A1080a-D model, DC is turned off in both servers by pressing 

the Forcible Shutdown button of either one of Server 1 and Server 2.

●

 To reboot the server after turning DC off forcibly with this DC OFF 

button, perform it after turning AC OFF and then ON. 

Содержание Express5800/A1080a

























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов