manualshive.com logo in svg

NEC Express5800/A1080a, Руководство пользователя, Страница: 335 / 696

Поделиться
Скачать
NEC Express5800/A1080a Скачать руководство пользователя страница 335

Hardware 

 

 

 

335

 

Virtual Disk 

 

Virtual disk is a logical drive defined in disk group. It is recognized as a physical drive by OS. The 
allowable number of virtual disks is up to 16 per disk group, or up to 64 per controller. 

 

The figure below shows a sample configuration in which the RAID Controller (MegaRAID) is 
connected with three HDDs, creating one Disk Group. Two RAID5 virtual disks (VD) are defined 
in the Disk Group. 

 

 

Parity 

 

The parity means redundant data. A single set of redundant data is created from the data saved 
in more than one HDD. 
The created redundant data is used for data recovery when a HDD is defected. 

 

Hot-Swap 

 

The hot-swap enables a HDD to be removed (or replaced) under system operation. 

 

Hot Spare 

 

The hot-spare is prepared as an auxiliary HDD substituting for a defected HDD included in a disk 
group which is configured at a redundant RAID level. Detecting a HDD fault, the system 
disconnects the HDD (or makes it offline) and starts rebuild using the hot-spare. 

 

 

 
 
 
 
 

 

NOTE: 
For standby rebuild (rebuild using hot-spares), refer to "Features 
of RAID Controller (MegaRAID)". 

Содержание Express5800/A1080a

























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов