D-21
2.
Setting Up Your
Projector
2.1
Setup procedure
Set up the projector according to the procedure below. This chapter describes the installation
procedure until turning on of the power.
- STEP1
Projector installation (See page D-22)
- STEP 2
Connecting the power cable (See page D-23)
- STEP3
Mounting the primary lens (See page D-26)
- STEP4
Mounting the anamorphic lens motorized turret (See page D-28)
- STEP5
Installation of Small Iris (Information for Service Personnel) (See page D-29)
- STEP6
Mounting Exhaust equipment (See page D-37)
- STEP7
Mounting the lamp bulb (See page D-38)
- STEP8
Mount the following optional parts as required.
Install a touch panel (See “Touch Panel Section”).
Install a multimedia switcher (See “Multimedia Switcher Section”)
