NC1600C
3. Projector Adjustment and Connection
D-54
3.9
Controlling Your Projector Using a Wireless LAN
Card
When using a wireless LAN to control the projector, please insert a wireless LAN card
(available separately) into the Connection terminal PC Card slot located at the projector side.
Note
•
Be careful of the following when using a wireless LAN.
- The unit cannot be connected to the same network group (*) of the NIC (Network
Interface Card).
- Use the wireless LAN in the ad hoc mode.
* The same network group is one in which the AND value of the IP address and subnet
mask are the same.
•
If the wireless LAN card is in use, NC1600C cannot be controlled from the incorporated LAN
port (LAN A/LAN B). The Cinema circuit can be controlled even if the wireless LAN is in
use.
•
Be sure to set or remove your wireless LAN card only when the power to your projector is
off. Insertion or removal of a wireless LAN card when power to your projector is on may
result in a destruction of the wireless LAN card.
