NC1600C
3. Projector Adjustment and Connection
D-48
[3]
Slide sensor (R) in the
direction of arrow B and
fasten it in the position
where the sensor switches
from “off” to “on” by
tightening the two M4
screws.
* If necessary, use the auxiliary sensor
adjusting holes.
3.6.3
Y-direction adjustment
[1]
Loosen pan angle adjusting
screws (f) and (r) a little.
[2]
Turn the Y-direction
adjusting knob to adjust.
[3]
After adjusting, tighten pan
angle adjusting screws (f)
and (r) to fasten.
On
Off
M4 screw
Auxiliary sensor
adjusting holes
Y-direction
adjusting
knob
pan angle adjusting screws (f) and (r)
