D-39
3.
Projector Adjustment
and Connecting
3.1
Flow of Adjustment and Connecting
Adjustment and Connecting of the projector accord to the procedure below.
- STEP 1
Turning your projector on (See page D-40)
- STEP 2
Setting the projector projection method (See page D-41)
- STEP 3
Adjusting the lamp bulb shaft (See page D-42)
- STEP 4
Adjusting the primary lens (See page D-44)
Display the test pattern to adjust the screen size, screen ratio and focus.
- STEP 5
Adjusting the anamorphic (See page D-46)
- STEP 6
Connecting the image input (See page D-52)
- STEP 7
Connecting the various control terminal (See page D-53)
This chapter explains the adjustment and connection of the projector with Steps 1 to 7.
Steps 1 to 7 complete the adjustment and connection of the projector. Next, set up the
projector from the touch panel. Refer to the “Touch Panel Section” for the procedure.
