NC1600C
3. Projector Adjustment and Connection
D-43
[4]
Adjust the X-axis adjustment
screw to have the maximum
bulb alignment.
With rotating the adjustment screw using a
5-mm hexagonal wrench, set the Peak hold
value in the “Bulb Alignment” screen to the
maximum. Average shows the average value in
the adjustment.
[5]
Adjust the Y-axis adjustment
screw to have the maximum
bulb alignment.
With rotating the adjustment screw using a
5-mm hexagonal wrench, set the Peak hold
value in the “Bulb Alignment” screen to the
maximum. Average shows the average value in
the adjustment.
[6]
Mount the bulb adjustment
panel at the rear of the
projector.
Loosen two screws to mount the bulb
adjustment panel.
This completes the adjustment of the lamp bulb shaft.
Bulb adjustment
panel
X-axis adjustment screw
Y-axis adjustment screw