NC1600C
2. Setting Up Your Projector
D-28
2.5
Mounting the anamorphic lens motorized turret
Use an optional anamorphic lens for projection of cinemascope size.
Anamorphic lens motorized turret (separately sold: NC-AT02/NC-AT01) is required for
mounting of the anamorphic lens.
Caution
•
Before transporting this unit from one place to another, be sure to remove the
anamorphic lens from the unit and lock all adjusting parts of the unit up.
•
If you need to move the projector from one place to another, be sure to detach this
lens unit from the projector before moving.
•
Be sure to faithfully follow the instructions given in this manual.
•
This unit should be attached to or detached from the projector without anamorphic
lens installed.
2.5.1
List of accessories attached to turret
- Anamorphic lens motorized turret
- Allen screws (hexagonal socket head
screws) (M8x25): 8
- Allen screws (hexagonal socket head
screws) (M6x12): 2
- Rubber washers: 4
