NC1600C
2. Setting Up Your Projector
D-35
[3]
Remove the coolant tank.
The coolant tank can be removed by
pushing open the acrylic levers (four
locations).
The removed coolant tank is inserted in the
insertion opening as shown in the figure on
the right.
[4]
Remove the engine plate from
the engine section.
Remove the single screw, then remove the
engine plate.
[5]
Install the small iris.
Insert the attached small iris.
(Small iris)
[6]
Install the engine plate in
the engine section.
Install the engine plate removed in step
[4], then fasten with the single screw.
Engine plate
Small iris
Engine plate
Coolant tank
Engine section
acrylic levers
Insertion opening
