NC1600C
4. LCD Menu
D-62
Date/Time
Use this to set the date and time on the projector.
←
Select the item to be set
←
Input numeric values
Use the remote controller to input numeric values. For the procedure to input
alphanumeric characters, refer to “Users Manual”.
Use the SELECT <Left/Right> buttons to move the cursor (under bar).
Date
Set the date here (Year, month, day).
Time
Set the time here (Hour, minute, second).
New Bulb
When the lamp bulb is replaced, reset the lamp time and select the lamp bulb type. This
menu is active in standby mode only.
Bulb Warning
To set the time for display of lamp bulb warning. This menu is active in standby mode only.
←
Displays the currently selected item with asterisk (*).
←
Displays the setting
Manual
Manually specify the warning time (H). Press the SELECT key to
display the numeric input line (input the value using the remote
controller).
Use Bulb Entry
Warning time set by Bulb Entry is used.
