NC1600C
3. Projector Adjustment and Connection
D-53
3.8
Connecting the various control terminal
For control, your projector comes with such ports as the PC control terminal and the Ethernet
port (RJ-45).
PC control terminal
(PC CONTROL)
Use this terminal when controlling the projector in serial
connection from a PC.
Ethernet port
(LAN-A/LAN-B)
Use this port when controlling the projector in LAN connection
from a PC.
This completes the adjustment and connection of the projector. Next, set up the projector
from the touch panel. Refer to the “Touch Panel Section” for the procedure.
