Safety and compliance
JuLI™ Stage - User Manual
5
1
Safety and compliance
1.1 General safety precautions
If water or other material enters the instrument, adaptor, or power inlet,
disconnect the power cord and contact a service person. For operating
environment, refer to Product Specifications.
Do not touch the main plug or power cord with wet hands.
Always ensure that the power supply input voltage matches the voltage
available at your location.
This instrument is air-cooled and its surfaces may become hot during operation.
During installing, leave a space of more than 10 cm (4 inches) around the
instrument and do not place any objects between the instrument and the walls.
Do not install the instrument on a slant or a place prone to vibrations, which
induces the risk of instrument malfunction or damage of the instrument.
Never insert any objects into the air vents of the instrument as this could result
in electrical shock, personal injury, and equipment damage.
Plug the power cord firmly into the wall outlet and AC adapter.
To avoid potential shock hazard, make sure that the power cord is properly
grounded.
Be sure to position the equipment such that it is easy to disconnect.
Turn off the instrument before unplugging the power cord and/or moving the
instrument.
If the instrument is dropped or broken, disconnect the power cord and contact
a service person. Disassembling the case will void the warranty.
Use only authorized accessories (adaptor, power cord, and USB drive).
