Muratec mfx-2200 Скачать руководство пользователя страница 85

Страница: 85 / 382

Copy

Functions

2-3

Basic

Resetting the settings

• Automatic reset

When no operations are performed for a set period of time after copying, the

machine will return to the default setting status.

The screen is preset at three minutes at the time of shipment. You can change

the reset time. You can also reset the screen immediately after scanning a

document (page 8-35).

• Resetting the settings by <Reset>

Press <Reset> to return to the default settings. After copying, press <Reset>

to reset the settings for the next user.

Memory overflow during copying

If the memory is exceeded while the documents are being stored, take the

following steps.

If the memory is exceeded while the first page of the documents are

being scanned

Set 1

Memory: 2%

Memory overflow

Paper

Auto

Zoom

100%

Doc.Type

Text 1/2

Press <Stop> to return to the standby screen.
If the memory is exceeded too often, wait until the memory is available, or

press [Doc.Type] to change the copy image quality before copying again.

If the memory is exceeded while the second page or later of the

documents are being scanned

Memory overflow

Number of stored page: 2

Store these pages?

Yes

Press [Yes] to copy the stored pages.
Press [No] to cancel the copy. Change the document type or wait until

the memory is available before copying again.

If you do not press any key for three minutes (time you set in copy

screen automatic reset: page 8-34), the stored pages are copied.

NOTE

The following display is shown when you use the ADF and the documents still remain
on the scanner.

Set 1

Memory: 5%

Press [Stop] to exit the doc.

Paper

Auto

Zoom

100%

Doc.Type

Photo 1/2

Press <Stop> to discharge the remained documents.



•
•



•
•

•

DB2-90290-60.indb 3

2007/02/02 12:31:53

Содержание mfx-2200































































































































































































































































































































































































Результаты поиска

Содержание mfx-2200

Отзывы:

Muratec mfx-2200, Руководство пользователя, Страница: 85 / 382

Результаты поиска

Содержание mfx-2200

Отзывы: