Muratec mfx-2200, Руководство пользователя, Страница: 78 / 382

1-58
About symbol
The symbol describes that loading the document vertically seen from the
front of the machine. In case of the ADF, load from the longer side of the
document.
Example: A5
• When loading the document
on the ADF
• When loading the document
on the document glass
Unacceptable documents
The following documents cannot be loaded on the ADF. Use the document glass.
• Torn documents or those with holes
• Extremely wrinkled or curled documents
• Documents which are moistened, or stuck with static electricity
• Documents with carbon on the back or no-carbon documents
• Cloth, metal sheets
• Documents with staples, paper clips, or adhesive tape attached
• Documents pasted or glued together
• Glossy documents or documents with a special coating
If you load the following types of documents on the document glass, the glass
surface could be damaged or cracked.
• Do not strongly press down a document when copying a thick document
• When a hard object is used as a document, load it carefully on the
document glass.
• Sharp protrusions could scratch the glass surface.
Scanning range
The document scanning range is as follows: Texts or images on shaded areas
cannot be scanned.
Fax: 4.5 mm
Copy: 3 mm
Fax: 4 mm
Copy: 4 mm
Fax: 294 mm
Copy: 297 mm
Fax: 254 mm
Copy: 257 mm
Fax: 208 mm
Copy: 210 mm
Fax: 4.5 mm
Copy: 3 mm
Fax: 4 mm
Copy: 4 mm
Fax: 4.5 mm
Copy: 3 mm
Fax: 4 mm
Copy: 4 mm
A3
B4
A4

DB2-90290-60.indb 58 2007/02/02 12:31:50