mru SWG100 CEM, Руководство пользователя

Страница: 148 / 155

MRU GmbH SWG 100 User Manual
Page 148 of 155
2. Open the path Extras/General settings, at the analyzer. Push F3=Modbus . At this
menu the modbus slave parameters can be configurated.
Example:
Baud rate: 19200
Slave address: 238
Stop bits: 1
Parity: even
Data bits: 8
Picture: The screenshot shows an example of a Modbus slave settings.
3. In the next step it is necessary to build a connection between the analyzer and the
network. To do this open the browser at a pc and open the webserver with the
address:
•
http://192.xxx.xxx.xxx/maintenance/index.html
Important
. With the test modus for the alarm outputs of the IO module, the alarm
relays at the IO modules and the relay at the PCB mainboard can be
activated.
Important
The 192.xxxx.xxx.xxx is the IP-address, which is configurated at the module (see
chapter xx).
Example:
The IP-address of the module is 192.168.100.154, then the correct address to invoke the
webserver is:
http://192.168.100.154 /maintenance/index.html.
4. The webserver-address is protected with a password. The default password is:
a. Username: admin
b. Password: admin.