mru SWG100 CEM, Руководство пользователя

Страница: 83 / 155

MRU GmbH SWG 100 User Manual
Page 83 of 155
Measurement SPX (Cycle phase details): In the cycle phase details of “Sample point X” the measurement time
and the suction delay can be configured. Each sample point can be configured individually. In the cycle phase
details the following times can be set:
MEASUREMENT SPx
Measuring site valves Valve of selected site is open, others closed
Zeroing valve Valve closed
Duration Phase duration: 2 min. to 24 h
Suction/response time: 30 sec. to 1h
Pure measurement: calculated
H2S-low: Activated/protect (Optional)
Stand-by (cycle phase details): In the cycle phase details “Stand - by” the sleep mode time can be configured. In
the cycle phase details the following times can be set:
•
Phase duration: Entire Stand-by time (Purging time + Quiet time = Phase time).
•
Purging time: The time, to purge the analyser with ambient air, through the zero gas inlet.
•
Quiet time: The time, where the analyser is in the pure stand-by mode.
STAND-BY
Measuring site valves Valves closed
Zeroing valve Valve closed
Duration Phase duration: 2 min to 24h
Purging time: 30 sec. to 1h
Quiet time: calculated
•
Purging (cycle phase details): The purging is a separate configuration point to purge the analyser with ambient
air through the zero gas inlet. It can be helpful, if the analyser must switch between a sample point with different
sample gas concentrations.