Motrona DS230 Series, Руководство по безопасности

Страница: 64 / 100

Ds230_03a_oi_e.doc / Jun-15 Page 64 / 100
„Switching Menu“:
No. Parameter Range Default
039 Switch Mode OUT1
(switching condition for OUT1)
:
0 |f| >= |Preselection|
Output switches in event of overspeed {S, H}
1 |f| <= |Preselection|
Output switches in event of underspeed {S, H, A}
2 |f| == |Preselection|
Output switches in event of leaving the
frequency band (Presel/- Hysteresis) {S, H, A}
3 Standstill (see parameter 056)
Output switches in event of standstill
4 f >= Preselection
Output switches in event of overspeed
May only be used with positive preselection
values! {S, H}
5 f <= Preselection
Output switches in event of underspeed
May only be used with positive preselection
values! {S, H, A}
6 f == Preselection
Output switches in event of leaving the
frequency band (Presel/- Hysteresis)
Only used with positive preselection values! {S, H, A}
7 f > 0
Output switches, if a positive frequency (e.g.
clockwise direction) is detected. The directional
information will be deleted immediately when
„standstill“(Parameter 056) is detected.
8 f < 0
Output switches, if a negative frequency (e.g.
anticlockwise direction) is detected. The
directional information will be deleted
immediately when „standstill“(Parameter 056)
is detected.
040 Switch Mode OUT2
(switching condition for OUT2)
:
Settings are analogous to „Switch Mode OUT1“
0 - 8 0
041 Switch Mode OUT3
(switching condition for OUT3)
:
Settings are analogous to „Switch Mode OUT1“
0 - 8 0
042 Switch Mode OUT4
(switching condition for OUT4)
:
Settings are analogous to „Switch Mode OUT1“
0 - 8 0