Motrona DS230 Series, Руководство по безопасности

Страница: 92 / 100

Ds230_03a_oi_e.doc / Jun-15 Page 92 / 100
Continuation „Runtime Error“:
Error code
BG230 Error
Operator Software OS6.0
Instruction
H‘ 0000 0400 Sequence Analog Output Error Error of the analog output.
Switch off the unit. Remove the wiring and
link X4:2 and X4:3
Switch on the unit.
If error code is off

external error e. g. faulty
wiring or open circuit.
If error code is still active

internal error
(contact manufacturer)
H‘ 0000 0800 Readback Relay Output Error Error of the relay output.
Contact manufacturer.
H‘ 0000 1000 Readback Analog Output Error See error code H‘ 0000 0400
H‘ 0000 2000 GPI Error Error of the control inputs.
Faulty wiring, illegal signal states (no
complementary signals) or internal error.
H‘ 0000 4000 Sequence DAC Output Error See error code H‘ 0000 0400
H‘ 0000 8000 DAC Output Error See error code H‘ 0000 0400
H‘ 0001 0000 Phase Channel 1 Error Error of the phase of Sensor1.
Check parameter 017.
Switch off and switch on the unit.
H‘ 0002 0000 Phase Channel 2 Error Error of the phase of Sensor2.
Check parameter 024.
Switch off and switch on the unit.
H‘ 0004 0000 Frequency Error Error of the divergence.
Check parameter 004 to 021.
Switch off and switch on the unit.
H‘ 0008 0000 Drift Error 1 Error of the drift of Sensor1.
Check parameter 016.
Switch off and switch on the unit.
H‘ 0010 0000 Drift Error 2 Error of the drift of Sensor2.
Check parameter 023.
Switch off and switch on the unit.
H‘ 0020 0000 ESM Error Internal error. Switch off and switch on the
unit. If the error repeats contact manufacturer.
H‘ 0040 0000 Wrong Parameter Error Stimulation Error of the Error Simulation.
Check parameter 009.
Switch off and switch on the unit.
H‘ 0080 0000 Register Error
Internal error. Switch off and switch on the
unit. If the error repeats contact manufacturer.
H‘ 0100 0000 RTI/QUP Cycle Error
H‘ 0200 0000 External Clock Error
H‘ 0400 0000 ADC Error
H‘ 0800 0000 I2C Error
H‘ 1000 0000 Initialisation Test Error