manualshive.com logo in svg

Motorola WiNG 5.6, Справочное руководство

Поделиться
Скачать
Motorola WiNG 5.6 Скачать руководство пользователя страница 788

12 - 48 WiNG 5.6 Access Point System Reference Guide 

Use the Crypto Certificate Renewal screen to view and if required, trigger certificate renewal for CMP certificates.

1. Refer to the following for more information on Crypto CMP Certificates:

2. Select 

Trigger Certificate Renewal 

to begin update the credentials of the certificate. If a renewal succeeds, the newly 

obtained certificate overwrites an existing certificate. If the renewal fails, an error is logged.

3. Select 

Refresh 

to update the screen to the last saved configuration.

12.1.12 Re-elect Controller

Devices

Use the 

Controller Re-election

 screen to identity available access point resources within a selected RF Domain and 

optionally make some, or all, of the access points available to initiate tunnel connections.

To re-elect controller adoption resources for tunnel establishment:

1. Select 

Operations.

2. Ensure a 

RF Domain

 is selected from the Operations menu on the top, left-hand, side of the screen. Otherwise, the Re-

elect Controller screen cannot be located, as it does not display at either the system or device levels of the hierarchal tree.

3. Select the 

Re-elect Controller

 tab.

Hostname

Lists the administrator assigned hostname of the CMP resource requesting a certificate 
renewal from the CMP CA server.

MAC Address

Lists the hardware encoded MAC address of the CMP server resource.

Trust Point Name

Lists the 32 character maximum name assigned to the target trustpoint. A trustpoint represents 
a CA/identity pair containing the identity of the CA, CA specific configuration parameters, and 
an association with an enrolled identity certificate. 

Trust Point Valid 
Until

The expiration of the CMP certificate is checked once a day. When a certificate is about to 
expire a certificate renewal can initiated with the server via an existing IPsec tunnel. If the 
tunnel is not established, the CMP renewal request is not sent.

NOTE: 

Take care when selecting access points for controller re-election, as client con-

nections may be broken on upon re-election. Ensure an elected access point's client load 
can be compensated by another access point in the same RF Domain.

NOTE: 

The 

Re-elect Controller

 tab is only available at the RF Domain level of the UI’s 

hierarchal tree and is not available for access points.

Содержание WiNG 5.6

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды