manualshive.com logo in svg

Motorola WiNG 5.6, Справочное руководство

Поделиться
Скачать
Motorola WiNG 5.6 Скачать руководство пользователя страница 340

5 - 254 WiNG 5.6 Access Point System Reference Guide 

Antenna Gain

Set the antenna from 0.00 - 30.00 dBm. The access point’s 

Power Management Antenna 

Configuration File

 (PMACF) automatically configures the access point’s radio transmit 

power based on the antenna type, its antenna gain (provided here) and the deployed 
country’s regulatory domain restrictions. Once provided, the access point calculates the 
power range. Antenna gain relates the intensity of an antenna in a given direction to the 
intensity that would be produced ideally by an antenna that radiates equally in all 
directions (isotropically), and has no losses. Although the gain of an antenna is directly 
related to its directivity, its gain is a measure that takes into account the efficiency of the 
antenna as well as its directional capabilities. Motorola Solutions recommends only a 
professional installer set the antenna gain. The default value is 0.00.

Antenna Mode

Set the number of transmit and receive antennas on the access point. 1x1 is used for 
transmissions over just a single “A” antenna, 1x3 is used for transmissions over the “A” 
antenna and all three antennas for receiving. 2x2 is used for transmissions and receipts 
over two antennas for dual antenna models. The default setting is dynamic based on the 
access point model deployed and its transmit power settings.

Enable Antenna Diversity

Select this option for the radio to dynamically change the number of transmit chains. This 
option is enabled by default. 

Wireless Client Power

Select this option to enable a spinner control for client radio power transmissions in dBm. 
The available range is 0 - 20 dBm. 

Dynamic Chain Selection

Select this option to allow the access point radio to dynamically change the number of 
transmit chains. This setting is disabled by default. The radio uses a single chain/antenna 
for frames at non 802.11n data rates.

Rate

Once the radio band is provided, the Rate drop-down menu populates with rate options 
depending on the 2.4 or 5.0 GHz band selected. If the radio band is set to Sensor or 
Detector, the Data Rates drop-down menu is not enabled, as the rates are fixed and not 
user configurable. If 2.4 GHz is selected as the radio band, select separate 802.11b, 
802.11g and 802.11n rates and define how they are used in combination. If 5.0 GHz is 
selected as the radio band, select separate 802.11a and 802.11n rates define how they 
are used together. When using 802.11n (in either the 2.4 or 5.0 GHz band), Set a MCS 
(modulation and coding scheme) in respect to the radio’s channel width and guard 
interval. A MCS defines (based on RF channel conditions) an optimal combination of 8 
data rates, bonded channels, multiple spatial streams, different guard intervals and 
modulation types. Clients can associate as long as they support basic MCS (as well as 
non-11n basic rates).

For more information on 802.11n MCS rates, see 

MCS Data Rates on page 5-58

.

Radio Placement

Use the drop-down menu to specify whether the radio is located Indoors or Outdoors. The 
placement should depend on the selected country of operation and its regulatory domain 
requirements for radio emissions. The default setting is Indoors.

Max Clients

Use the spinner control to set the maximum permissible client connections for this radio. 
Set a value from 0 - 256. AP6522, AP6522M, AP6532, AP6562, AP8132, AP8232, AP7181 
AP7131 and AP7161 model access points can support up to 256 clients per access point 
or radio. AP6511 and AP6521 model access points can support up to 128 clients per 
access point or radio.

Содержание WiNG 5.6

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды