manualshive.com logo in svg

Motorola WiNG 5.6, Справочное руководство

Поделиться
Скачать
Motorola WiNG 5.6 Скачать руководство пользователя страница 353

Device Configuration 5 - 267

10. Select

 OK

 to save the changes and overrides made to the DNS configuration. Select

 Reset

 to revert to the last saved 

configuration.

5.4.5.4.2 Overriding an ARP Configuration

Overriding the Network Configuration

Address Resolution Protocol

 (ARP) is a protocol for mapping an IP address to a hardware MAC address. ARP provides protocol 

rules for making this correlation and providing address conversion in both directions. This ARP assignment can be overridden 
as needed, but removes the device configuration from the managed profile that may be shared with other similar device 
models.

When an incoming packet destined for a host arrives at the access point, the access point’s gateway uses ARP to find a physical 
host or MAC address that matches the IP address. ARP looks in its ARP cache and, if it finds the address, provides it so the 
packet can be converted to the right packet length and format and sent to the destination. If no entry is found for the IP address, 
ARP broadcasts a request packet in a special format to all the machines on the LAN to see if one machine knows it has that IP 
address associated with it. A machine that recognizes the IP address as its own returns a reply indicating as such. ARP updates 
the ARP cache for future reference and then sends the packet to the MAC address that replied.

To define an ARP supported configuration:

1. Select 

Devices

 from the Configuration tab.

2. Select 

Device Overrides

 from the Device menu to expand it into sub menu options.

3. Select a target device from the device browser in the lower, left-hand, side of the UI.

4. Select 

Network

 to expand its sub menu options.

5. Select 

ARP

.

Figure 5-172

Device Overrides - Network ARP screen

NOTE: 

A blue override icon (to the left of a parameter) defines the parameter as having 

an override applied. To remove an override, go to the 

Basic Configuration

 screen’s 

Device Overrides

 field and select 

Clear Overrides

. This will remove all overrides 

from the device.

Содержание WiNG 5.6

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды